Different Types of Insulation Used in Refrigerated Bulk Storage

Refrigerated Bulk Storage

One of the most important types of refrigerated storage in a commercial or institutional kitchen is walk-in storage. There are other types of refrigerated storage conveniently located near the preparation area, like sandwich units, pizza preparation units, or under-counter units. Still, the bulk storage is located in the walk-in cooler or freezer.

There are many different walk-in manufacturers, but one of the main things that set them apart is what kind of medium is located between the interior and exterior metal skins, the insulation that is used. The insulation medium used most often on the higher quality products is either polyurethane or expanded polystyrene insulation Houston. Some of the budget or less expensive walk-ins manufactured may use polyisocyanurate or styrofoam as insulation.

The efficiencies of the various types of insulation are measured by what is referred to as the R value. The higher quality and, consequently, the more expensive insulation has an R value of anywhere from R-25 to R-32. The higher the R value, the more efficient the insulation. While you will pay more money upfront for the higher quality insulation, you will pay less in energy costs to refrigerate a walk-in cooler or freezer over the years, and the return on investment is huge.

Other energy saving features that have an excellent return on investment are LED lights. The energy consumed by the cheaper incandescent lights is much greater than LED lights. Also, the LED lights have better coverage resulting in you needing fewer lights.

There are also refrigeration controls that are a great investment. Both coolers and freezers have evaporators that have to defrost regularly to operate correctly. The defrost cycle uses a lot of energy, so the less defrost cycles you need saves a lot of electricity. Units that only defrost on demand instead of a set number of times a day is a tremendous energy saver.

As you can see, there are times that you are better off spending money up front to save money operating costs over the lifetime of your refrigerated storage.…

Continue Reading

Building Your Own Airplane

constructing an airplane

You have your pilot’s license and are considering constructing an airplane of your own to take flying. There are many steps you will need to follow to ensure that you build a quality aircraft that will keep you and your passengers safe while you are in the air. Here are a few items to consider as you begin your build process.

Purchase a Kit

The simplest way to build your aircraft is to purchase a kit from a manufacturer. Research the type of airplane that you want. Think about the specific options that you want it to have, such as a certain number of seats, as you are shopping. Keep in mind that you may need special parts from a high-precision milling Santa Clara County company as you are working on your project. You will need to add these pieces to your final budget. Ask those you may know in the industry for recommendations on which package you should consider. They will be able to tell you if one type of plane is simple to put together and if one is more difficult. Once you have completed your research, reach out to the business that is selling the one you want and organize the transaction.

Take a Class

Contact your local airport to find out if there are any aviator clubs in your area. They will be able to offer you advice on your build as well as refer you to any construction classes that are being held nearby. These courses will assist you in assembling the craft so that it operates correctly. They can also help you through any sections that you may be less than sure of or lack training in. Some programs can also offer you space to work in if your garage or shed is too small. Having an experienced professional beside you from start to finish should have your airplane functional and in the skies quickly.…

Continue Reading

What You Should Know About Working as a Civil Engineer

Civil Engineer

As one of the oldest engineering professions, civil engineering continues to be an important field in today’s society. These practitioners are key in creating and developing the built environment. From roads to bridges to water conveyance systems and more, these engineers play a major role in life as we know it. Are you considering studying this field in school? Here’s what you should know about working as a civil engineer.

How Much School?

Unlike law school or med school, engineers aren’t necessarily required to do graduate work to find good jobs; however in certain markets, you might need a Master’s degree to be competitive. Look for a civil engineering program that is accredited by ABET or the Accreditation Board for Engineering and Technology. Graduate work in this field gives you opportunities to deepen your education in one of the many practice areas in the field such as transportation, structural, geotechnical, environmental, water resources, construction management and more.

Where To Work?

Civil engineering graduates can find careers in various disciplines in both the public and private sectors. Many people start off doing designand eventually move into project management. They can work for state departments of transportation, private design firms or even construction companies MA. Some engineers pursue a career in academia for teaching and research. As an engineer, you develop skills in logic, analysis and problem solving that lead to careers outside of the field such as law, medicine and business.

Do I Need a License?

As a civil engineer, you may need to earn your professional engineering license. In most states, you’re required to pass a fundamentals exam that certifies you as an engineer-in-training. With four years of experience and successful completion of a licensing exam, you can become a professional engineer. These engineers can sign and seal designs for public facilities and run their own firms. Your particular career path may not require licensure.

You have many options as a new graduate in this field. You can design new facilities, oversee their construction and maintenance or conduct relevant research. The options are endless.…

Continue Reading

Is a Career in CNC Machining Right for You?

CNC Machining

If you are detail-oriented, like numbers and enjoy working with technology, the area of Computer Numerically Controlled (CNC) machining may be a good career choice. This field is crucial to manufacturing, so the job outlook looks very good in the coming years.

Why Is CNC Machining Important?

CNC machines are involved in all types of manufacturing. They are used to make everything from automobile parts to medical equipment and are an integral part of 21st century industry. CNC machining can make precise cuts, grinds and holes for applications that require extreme precision.

What Do CNC Operators Do?

People who run CNC machines are usually responsible for making sure the equipment is in good order, setting it up, programming it and producing the finished part. In large companies, those tasks could be shared over several employees, but in a small shop, one person might do the whole thing.

What Education Do You Need?

CNC Operators usually go to a trade school. A high school diploma or GED is required by most employers, and many will hire people who attended a vocational-technical or career center for CNC machining in high school. Some institutions offer associate degrees in CNC machining, and there are three levels of certification available through the National Institute for Metalworking Skills (NIMS). These programs look at programming and using CNC equipment and skill in machining in general. After the initial training, many operators work as apprentices for a few years before becoming fully certified.

What Does a CNC Operator Make?

The Bureau of Labor Statistics lists the median salary for CNC operators at $45,000 a year. Salaries can depend upon where you live, so consider that figure an estimate. The good thing, though, is that there are jobs for CNC operators everywhere and the job outlook is good for the future.

The demand for CNC operators is high and expected to remain that way. This can be an interesting career for people who enjoy math, machines and technology.…

Continue Reading

3 Ways To Protect Your Home From a Storm

No matter where you live in the world, you are bound to encounter a big storm from time to time. However, did you know that even a small storm can cause significant damage to your house if you haven’t adequately prepared it? Over time, homes and properties deteriorate and need to be maintained. Following a regular maintenance schedule will give you peace of mind and will save you money in the long run.

Check Retaining Walls

A landslide is a quick way to ruin anyone’s day. The sheer volume of dirt and rocks can quickly demolish anything in its path. If you have a retaining wall anywhere around your home, it is important to maintain it regularly. Look for cracks in the stones or the mortar around them. Also, look for bulges or bowing of the wall. If you see a change in the stones, it could mean that the soil is shifting, and you could have a rupture at any time. If you are unsure how to repair the wall yourself, look for geotechnical engineering services Union City CA.

Replace Loose Shingles and Siding

Before every storm season, it is essential to evaluate the health of the outside of your home. Look for damaged or missing shingles. If a shingle is damaged, it has a better chance of pulling off entirely in a storm. Any areas that aren’t protected by shingles are opening your roof to even more damage from wind and rain. Furthermore, look for issues in your siding. Seal any cracks that might let water in and secure any areas that have gotten loose.

Give the Water a Place To Go

Gutters are an often overlooked part of a home, but they serve a crucial role in its preservation. Gutters allow rainwater to be collected and whisked away from your home instead of puddling around it and causing issues. If gutters aren’t cleaned regularly, then the water will overflow and potentially puddle near the foundation, which can cause major problems after time.…

Continue Reading

3 Things Geotechnical Engineers Do

Geotechnical Engineers

The infrastructure present in modern cities and towns could not exist without the labor of geotechnical engineers. Many of them work for environmental engineering companies and have used their knowledge to develop well-supported buildings and complex systems. Check out this list of three things geotechnical engineers do.

1. Investigate

Geotechnical engineers will investigate the conditions of the area where developers want to erect a structure. They will look into the dynamics and vibration of the soil in said area. They will engage in surface and subsurface explorations and collect soil samples that they send off to laboratories for further analysis. The aim of these investigations is to gather as much information as possible about the properties of a worksite. Such investigations often reveal what will occur on the site during an earthquake.

2. Design

Engineering design plays an important role in the field of geotechnical engineering. Technicians have to plan out specific projects while taking certain factors into consideration (e.g., time, size, and shape). Geotechnical engineers have designed foundations, slopes, and pavements. Some have crafted projects that took into account terrain hazards while others have developed ones that had water retention capabilities. Many have taken on projects for structures designed to withstand powerful seismic events.

3. Construct

A multitude of geotechnical engineers have helped build roadways, tunnels, levees, and embankments. After they investigate the behavior of the soil and rock in certain locations and design structures that are sturdy and stable, they carry out various construction projects. While doing so, they utilize materials that work in synergy with the elements they are placed in. They position these materials in ways that keep those who end up walking or driving upon them safe and secure.

The work that geotechnical engineers do is extremely vital. These engineers have helped a plethora of individuals and businesses.…

Continue Reading

Everything You Should Know About Dredging

It is important to remember that dredging is the essential process of removing sediment build-up at the bottom of lakes, rivers, seas, and oceans, with an idea to prevent potential environmental, constructional, and commercial disasters.

Of course, you should know that dredging benefits vary based on numerous factors, especially if you have in mind that multiple aspects can affect this particular process.

We can differentiate various types and options you can find on the marketing, including mechanical grab excavators and complex hydraulic options that will clean sediment in a matter of minutes wherever you decide to use it.

However, we are not here to talk about different dredging options, but the importance of using this particular process in the first place.

One of the most critical aspects of this particular process comes with a single purpose to improve boat access in specific areas. It is vital to enable large ships and boats to use a particular channel because sedimentation build-up can affect overall navigation.

1.Construction

Apart from other reasons, you should know that it is vital to conduct dredging in areas you wish to construct, including bridges, dams, marinas, and other significant projects.

This particular process is effective if you wish to move the landscape water, which is an excellent option for freeing up a land and reducing flood issues in the future.

However, you should know that these projects might lead to severe environmental issues, which is why you should conduct an effective and careful strategy.

2.Clean Up Debris

You probably understand by now that cleaning debris is one of the results of dredging, which is why you can boost the environment while dealing with problems including decaying and blocked organic matters such as branches, trees, or leaves.

It is vital to learn that decaying processes can affect a particular water-body quality because they will prevent oxygen from entering inside. As a result, you can avoid this from happening by conducting a proper process to provide you peace of mind.

Lack of oxygen will affect aquatic organisms, fish, and other things within the water. Besides, as soon as you decide to remove contaminated sediment, you can rest assured because a natural process will return water quality to normal.

3.Valuable Materials

You should know that another critical advantage of dredging is the ability to recover precious materials, metals, and minerals, including copper, gold, silver, cobalt, manganese, and zinc, among others.

It is crucial to remember that you can find a wide array of minerals next to hydrothermal vents, which will allow you to reach high depths and get what you wanted in the first place.

As soon as you visit this link: https://www.pacificmaritimegroup.com/suction-hydraulic-dredging/ you will learn more about hydraulic dredging process.

4.Increase Your Pond’s Value

If you have a household pond you have created for enjoyment, and other activities, conducting regular cleaning is essential to ensure good water quality.

As soon as you decide to create a pond, you should conduct regular maintenance to boost your property value and provide you peace of mind.

One study has shown that properly maintaining a pond on your grounds can significantly increase your property value, which is a significant consideration to remember.

5.Valuable Topsoil

You should know that you could use organic matter on the bottom of a particular lake or pond by dispersing it and creating topsoil that will provide you peace of mind.

This particular soil effectively nourishes different plants, grass, and trees, which is an important consideration to remember.

Signs You Should Start Dredging

  • Lousy Clarity – If you have noticed lower water clarity than before, we recommend you consider cleaning it up by using a good sediment clean-up that will help you out with the process. In most cases, lack of clarity happens because of sediment at the bottom, which you should remove to prevent potential issues.
  • Growth of Weed – Plant, and weeds are essential parts of a healthy river, lake, and pond. However, without proper maintenance, the pond will start having more weed than it can handle, preventing oxygen creation and affecting fishes and other aquatic life organisms. As soon as weed overgrows water, the phosphate levels will increase, which means that you will not reverse a process with dredging.
Continue Reading

To Go Beyond Iterative Tweaks, Re-engineer the Process for Real Change

An organization that relies on incremental process improvements or iterative adjustments to sub-processes will find itself mired in tasks that provide little value despite attempts to automate with technology.

By considering business process as a starting point for analysis and subsequent redesign, a portfolio of change management, such as operational re engineering Washington DC, can be utilized that employs rather than relies on information technology to improve efficiency.

Fundamental Rethinking

Improvements in cost, quality, service and speed have become the touchstones of performance measurement. In Re-engineering the Corporation, Hammer and Champy called for a “fundamental rethinking and radical redesign” of business processes to realize measurable change.

Process improvement distinguishes itself from other organizational development methods such as continuous improvement or TQM by aiming for fundamental change and redesign rather than iterative improvements. A pivotal role in such deep structural change is played by information technology. IT must move past its supporting role to become an enabler of new organizational forms and points of collaboration within and between organizations.

Process re-engineering targets four major areas within an business for affecting change. A process view is the common framework for considering the dimensions of organization, technology, strategy and people. Driven by a business strategy, the hierarchical structure, use of technology in communication and the skills, training, motivation and reward of its people should interact to create value for the customer.

Each of these processes are made up of similar attributes, including ownership, customer focus, adding value and cross-functionality.

Project Framework

Developed by Bhudeb Chakravarti, the INSPIRE seven-step framework can be used to develop and implement a process re-engineering project.

  • Initiate a new process re-engineering project and prepare a business case.
  • Negotiate project approval with senior management.
  • Select the key processes to be re-engineered.
  • Plan the process activities.
  • Investigate processes in problem areas.
  • Redesign the processes for performance improvement.
  • Ensure the success of redesigned processes through monitoring and evaluation.

With resources, support and leadership, business processes re-engineering can produce quantitative results and add value for customers.…

Continue Reading